Personal Protective Equipment (PPE) includes all clothing and work accessories designed to protect employees from workplace hazards. Protective equipment should not replace engineering, administrative, or procedural controls for safety - it should be used in conjunction with these controls. Employees must wear protective equipment as required and when instructed by a supervisor or faculty member.
IMPORTANT: Personal protective equipment is used to prevent exposure or contamination. PPE should always be removed before coming in contact with other individuals or before going in or near elevators, break rooms, classrooms, bathrooms, etc.
UCCS has developed task specific PPE requirements that apply regardless of the space you are in while performing these tasks. In addition, UCCS has established minimum PPE requirements for laboratory type spaces (including chemistry, biology, engineering, physics, health sciences, nursing, clinical and fine arts).
Principal Investigators (PIs) or laboratory supervisors are required to assess the hazards based on the procedures performed in the laboratory and the controls in use. The PI or laboratory supervisor should determine if additional PPE or specific PPE beyond the minimum is required. Required PPE should be detailed as a laboratory-wide requirement (e.g., lab coats) or in Standard Operating Procedures for specific laboratory procedure(s). PPE for some types of hazards are shown in the following table.
Hazards and PPE
General Apparel and Appearance
In the laboratory, do not wear open-toed shoes, sandals, shorts, cropped tops, or any other apparel that leaves skin exposed and unprotected. All loose clothing should be confined to avoid easily catching fire, dipping into chemicals, or becoming entangled in moving machinery.
Remove jewelry to prevent chemicals from collecting underneath, contacting electrical sources, catching on laboratory equipment, and/or damaging the jewelry itself.
Long hair should be tied back or confined to avoid easily catching fire, dipping into chemicals, or becoming entangled in moving machinery.