UCCS | Smart Classrooms

Smart Classrooms

Smart Classrooms Home open all / close all General Information

University Hall

Other Buildings

Audio-Visual Controls - University Hall 132 and 141

Christie Projector Remote Control	Remember to aim at the projector and press one button at a time.
	The power button is light red, labeled "on/off" in the top right corner of the remote. Press the power button once to turn the projector on. - Allow 1 minute for the projector to warm up before use. Do not turn the projector on and off frequently as this shortens projector and lamp life! When you are finished using the projector, press the power button twice to turn it off. The input button is located immediately below the power button, circled in red on the picture to the left. To project the computer, press "Input" until "Input 2" is displayed on the screen. - Check the laptop switchbox to select either the podium computer or the laptop input. To project the DVD/VHS deck press "Input" until "Input 3" is displayed on the screen.

Christie Projector Remote Control

Remember to aim at the projector and press one button at a time.

The power button is light red, labeled "on/off" in the top right corner of the remote.

Press the power button once to turn the projector on.
- Allow 1 minute for the projector to warm up before use.
Do not turn the projector on and off frequently as this shortens projector and lamp life!
When you are finished using the projector, press the power button twice to turn it off.

The input button is located immediately below the power button, circled in red on the picture to the left.

To project the computer, press "Input" until "Input 2" is displayed on the screen.
- Check the laptop switchbox to select either the podium computer or the laptop input.
To project the DVD/VHS deck press "Input" until "Input 3" is displayed on the screen.

Volume Control
	Volume is controlled using the knob behind the podium next to the phone. Adjust the volume to the middle of its range, left. Start your media, if Power Point adjust level before class. Adjust volume at knob and/or the source if applicable. If you have a problem with the audio, please return the volume to the normal level (left) before troubleshooting your media and input devices for the problem.

Volume Control

Volume is controlled using the knob behind the podium next to the phone.

Adjust the volume to the middle of its range, left.
Start your media, if Power Point adjust level before class.
Adjust volume at knob and/or the source if applicable.
If you have a problem with the audio, please return the volume to the normal level (left) before troubleshooting your media and input devices for the problem.